Reinforces and stabilizes the RTZ-divider to the Roller Track™.
Go to full item list
The RTZ-CLIP has two flaps which go into the holes closest to the RTZ-divider. Place the clip in the desired position with the opening facing into the RT-SHEET. Push down the divider into the clip. Repeat the action for the other side of the divider if needed. It is recommended to use the reinforcement clip to stabilize the divider when the shelf depth is 500 mm or above. For shelf depths of 500 and 550 mm, one single clip in the front is usually sufficient. For racking (600 mm and above) – use a clip both in the front and in the back.